BRANDO 2nd Generation Lighting Strip with High Power and Wide Beam Angle
Our plug and play system
Conventional lighting requires separate power and a wired connection to every lamp, needing the expertise of electricians. This becomes labour-intensive and costly when running many meters of lighting. The BRANDO LED Strip Lighting plugs into an existing power source using a power supply which then connects to one end of the LED strip.
Maintenance-free. Easy to repair.
Damage to lighting through routine underground activities happens. When a conventional lamp is damaged, it results in loss of illumination over many meters – making the affected area a safety hazard until repaired by a qualified electrician. Should a section of the BRANDO strip light be damaged, only this section loses light. The remaining portion of the strip continues to provide illumination – allowing for a safer environment. Additionally, damaged sections can be replaced in 8" strips – making it a quick and cost-effective fix.
• Intelligent temperature management, sensors monitor LED temperature and if safe parameters are exceeded the affected LED’s are automatically dimmed until safe temperatures are restored.
• Intelligent voltage surge management, restorable resistors limit overcurrent and overvoltage situations.
• AC to DC convertors, miniature voltage convertors.
• Short circuit protection, in the case of short circuit the power is isolated until the circuit is normalized.
Dimension: 10000mm(length） *20mm(width） *10mm(height）
TECHNICAL PARAMETERS:
| Part Number |
BO-SL144-220V(A) |
| LED Chip |
Epistar |
| LED configuration |
144 LED's spaced evenly over a metre length |
| Range fed |
100 metres |
| Recommended fixing height |
5 - 6 Metres |
| IP Rating |
68 |
| Power Consumption per LED |
0.23 Watts |
| Power Consumption per Metre |
33 Watts |
| Colour Rendering Index CRI |
> 80 |
| Colour temperature |
6500 Kelvin |
| Flux (lm) |
2362 Lumens / M |
| Voltage on lighting VAC |
220-230 VAC |
| Light maintenance |
15%-20% Drop over 4 years |
| Lifespan |
5 Years |
| Warranty Lighting |
3 Years |
| Outer covering |
Food grade silicone |
| Dimensions |
10000mm(length） *36mm(width） *7mm(height） |
| Tensile strength |
+-50KG |
| Operating temperature |
-40℃ to 120℃ |
| Protection |
Short Circuit
Over Voltage
Over temperature
Over Current |
|
|
|
BRANDO related Mining Strip Light
|
Part Number
|
LED
configuration
|
Range
|
Power/
meter
|
Light
Source
|
Working
Voltage
|
Luminous
Efficacy
|
Colour
Temperature
|
Dimensions
|
Outer covering
|
IP Rating
|
|
BO-SL60-24V(A)
|
60 LEDs/m
|
20m
|
15W
|
5050
|
DC24V
|
80Lumens /
Watt
|
6500 Kelvin
|
L: 10000mm
W: 20mm
H: 10mm
|
Food grade silicone
|
68
|
|
BO-SL60-36V(A)
|
60 LEDs/m
|
40m
|
15W
|
5050
|
DC36V
|
80Lumens /
Watt
|
6500 Kelvin
|
L: 10000mm
W: 20mm
H: 10mm
|
Food grade silicone
|
68
|
|
BO-SL60-110V(A)
|
60 LEDs/m
|
100m
|
15W
|
5050
|
AC110V
|
80Lumens /
Watt
|
6500 Kelvin
|
L: 10000mm
W: 20mm
H: 10mm
|
Food grade silicone
|
68
|
|
BO-SL60-220V(A)
|
60 LEDs/m
|
100m
|
15W
|
5050
|
AC220V
|
80Lumens /
Watt
|
6500 Kelvin
|
L: 10000mm
W: 20mm
H: 10mm
|
Food grade silicone
|
68
|
